Summit Refrigerated Incubator Performance Chamber, ABOD18LHD

Accucold's Performance Series includes BOD refrigerated incubators designed to provide reliable cold storage in water treatment centers, environmental laboratories, and other research facilities.

Model ABOD18LHD is an 18 cu.ft. refrigerated incubator. The adjustable control range allows you to manage the temperature between 4º and 60ºC (39.2 to 140ºF) and comes preset at 20ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. It comes with a hospital grade cord with a green dot plug for added safety in high traffic laboratory and research areas.

Inside, the ABOD18LHD utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with one internal fan ensures excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized bottle. This unit includes LED internal lighting with an on/off rocker switch so you can ensure the interior contents are not unnecessarily exposed to light. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention.

This refrigerated incubator comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The door ships with a left hand swing and self-closing function. This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.

Designed with hydrocarbon refrigerant, the ABOD18LHD provides an energy efficient solution to water storage. Additional size are available, as well as upgrades including digital data loggers, keyless entry locks, and more. Browse the complete Accucold lineup at accucold.com.

SPECIFICATIONS

Overview

Nominal Height 79.0" (201 cm)

Height of Cabinet 78.5" (199 cm)

Nominal Width 28.0" (71 cm)

Width 27.5" (70 cm)

Width with Door Open 28.0" (71 cm)

Nominal Depth 26.0" (66 cm)

Depth 26.0" (66 cm)

Depth with Handle 27.75" (70 cm)

Depth with door at 90° 52.0" (132 cm)

Capacity 18.0 cu.ft. (510 L)

Defrost Type Automatic

Door White

Cabinet White

US Electrical Safety ETL

Canadian Electrical Safety ETL-C

Amps 1.5

Voltage/Frequency 115 V AC/60 Hz

Weight 270.0 lbs. (122 kg)

Parts & Labor Warranty 2 Years

Compressor Warranty 5 Years

UPC 761101155159

Refrigerator Features

Door Swing LHD

Reversible No

Shelf Type Wire

Shelf Qty 7

Adjustable Shelves Yes

Thermostat Type Digital

Fan Type Interior

Refrigerant Type R290

Refrigerant Amount 1.75oz.

High Side PSI 280.0

Low Side PSI 90.0

Wheel Qty 4

Interior Light Yes

Temperature Range 4 to 60ºC (39.2 to 140ºF)

Dimensions

Interior Height 68.5" (174 cm)

Interior Width 24.13" (61 cm)

Interior Depth 18.75" (48 cm)

Compressor Step Height 6.5" (17 cm)

Compressor Step Width 24.13" (61 cm)

Compressor Step Depth 6.5" (17 cm)

FEATURES

BOD Refrigerated/Heated Incubator Designed to store water samples under reliable temperature conditions for optimum research results

Purpose-built design Constructed and featured for the storage of water samples

Pre-set to 20ºC Ideal temperature for bottle incubation

+/-1ºC Variation The published temperature variation is derived from the maximum deviation of an NTC sensor in a 1 oz. vial located nearest the chamber geometric center during a 24 hour test period

Large capacity 18 cu.ft. interior can hold up to 300 300ml incubator glass bottles (note: bottle capacity varies by exact bottle design and size)

Antimicrobial silver ion-coated handle Powder-coated handle with naturally occurring silver ions to help reduce the spread of germs

Adjustable temperature Intuitive controls let you adjust the interior temperature between +4 to +60ºC

Temperature alarm Visual and audible alarms alert if the interior temperature rises or falls out of set range

Remote alarm contacts Electronic controller is equipped with a volt-free contact for alarm forwarding to an external remote system (contacts located in the external rear of the unit)

Automatic defrost with adjustable cycle defrost Adjustable cycle defrost operation ensures the unit avoid temperature spikes and ice buildup

Access port Includes a pre-installed 1/2" probe hole in the right interior wall to allow easier connection to user-provided monitoring equipment

Open door alarm Alarm will sound if the door is left ajar for over 4 minutes (adjustable from 1-99 minutes)

Audible power failure alarm Battery-powered alarm sounds if the power connection is interrupted

Sensor failure alarm Audible and visual alarm warns if the sensor is disrupted

Password protection Control panel requires password entry to adjust the parameters beyond the set point

Microprocessor control panel Digital controls with a large LED readout in Celsius or Fahrenheit for intuitive temperature management

Resettable min/max display Control panel provides a readout of the low and high temperatures in 15 minute increments

Factory-installed lock Keyed lock conveniently located towards the top of the door for added security (2 keys included)

Adjustable plastic-coated wire shelves for improved circulation Shelves can be positioned with a front lip for small storage items or reversed to a flat position to better hold larger items, with multiple shelf positions spaced at 1/2" to accommodate virtually any size

Hospital grade cord with 'green dot' plug Secure three-pronged cord for added unit safety

Durable interior Walls are constructed from white powder coated metal for added strength and improved temperature retention

Interior light Energy efficient LED lighting with internal on/off switch

Magnetic door gasket Quality door gaskets ensure a tight seal for energy savings and improved performance

Locking casters Four pre-installed 3" wheels with brakes ensure smooth mobility, making it easier to clean around and underneath the unit as needed

Extended warranty 2 years parts and labor/5 years compressor

Eco-Friendly Using environmentally friendly hydrocarbons refrigerants for a greener footprint

Usage stickers Ships with removable warning stickers for "DO NOT UNPLUG," "DO NOT ADJUST TEMPERATURE," and "DO NOT STORE PERSONAL ITEMS"

Additional choices Solid and glass door choices available from 1 to 15 cu.ft. Browse the Pharma-Vac series for more information

Versatile design Compatible with Pyxis®, Omnicell®, and AcuDose RX®

100% CFC free Environmentally friendly design without ozone-damaging chemicals

CARB Compliant Environmentally friendly hydrocarbon-based refrigerant for a greener footprint that meets current CARB regulations

DOWNLOADS

BROCHURE w/ DRAWINGS (ABOD18LHD.pdf)

TECHNICAL DRAWING (.dwg) (ARS18PV_REFRIGERATOR__A-C_2018__2.dwg)

REVIT MODEL (QF_Summit_ARS18PV_Pharma_Vac_All_Refrigerator_2.rfa)

USE & CARE (ABOD18LHD-User-Manual.pdf)